Flow-type magnetic separator MF 65/2-S6-N-4-80-N-P

Doprava nad 1000 Kč ZDARMA

Before ordering a product, read the Safety and Handling Conditions, please.

52477
8595134063318
In Stock
We'll send today
£2,469.46/pc Tax excluded
In Stock
We'll send today

Data sheet

Material Stainless steel DIN 1.4301, EN 10088, (X5CrNi 18-10), ČSN 17240, AISI 304, AKV 7
Total weight 10 kg
Magnet temperature resistance 80 °C
Input/Output 65 mm
Body surface finish Glass bead blasting
Sealing NBR (perbunan, -10 °C až 100 °C)
Piping connection 2x screwing; DIN 11851 DN 50 PN6; material: 1.4301
Number of casings Double-walled
A number of magnetic rods, detail 3 (3 x dia. 30 mm)
Tearing force 93 N
Maximum pressure PS 6 bar
Maximum temperature TS 80 °C
Magnetic component weight 5,3 kg
Magnetic force 10.200 Gs
Product state New
Design Standard
Number of tubes 3
Magnet type Neodymium (NdFeB)
Replaceable tubes NE
Suitable for food industry YES

Videos

 

 
 

Additional description

The video above is only to illustrate the principle of the function and may not match the execution, design, number of tubes for this particular item on the e-shop you are currently on.

Magnetic separator, flow type, is designed for a separation of ferromagnetic impurities from liquid mixtures.
The device is manufactured using DIN 1.4301 stainless steel.
Magnetic induction is on the level No. 1 (core magnetic induction: 10400 G, core tear-off force: 133 N, coat magnetic induction: 7400 G, coat tear-off force: 100 N).
Magnetic separator (magnetic filter) body is surface-treated by sanding; magnetic pipes are polished.
Magnetic core weight is 4.5 kg; total weight is 8 kg.

Connection: 2x DN 50 P 6 screwing according to the standard ČSN EN 1092-1, type 01, DN50 PN6, DIN 1.4301 material.
 
For more information please see: www.magnetic-separators.info (It will open in a new window)
 
 
The device is designed for a separation of metal impurities from environments that are not dangerous according to Article 13 of the Directive No. 2014/68/EU (PED); agent group 2.
Maximum permitted pressure PS is 6 bar, maximum working temperature of this separator is 80°C.
These flow-type magnetic separators do not fall under any pressure device category according to 2014/68/EU (Article 4, section 3.).
 
For more information please see: www.magnetic-separators.info (It will open in a new window)

The reported tear force values for some products were measured under ideal conditions given by the test environment. However, these values may vary depending on the specific type of environment where, for example, operating conditions and subsequent wear may affect the effectiveness of the product. However, measurements have not been made for all products and in such cases are only an estimate or internal auxiliary calculation by the vendor. The values quoted are therefore to be considered as indicative and the Seller declares that they are not a description of the goods in terms of the agreed characteristics in the sales contract on the basis of Article 6(a) of Directive (EU) 2019/771 of the European Parliament and of the Council of 20 May 2019 on certain aspects of contracts for the sale of goods, amending Regulation (EU) 2017/2394 and Directive 2009/22/EC and repealing Directive 1999/44/EC. In order to determine the exact value of the tear force in a specific case, it is necessary to carry out the actual measurement. In case the detected values of the breakaway force are not sufficient for you, as they do not correspond to the stated values, you can take advantage of the guaranteed return option within 30 days under the conditions stated here: https://magsy.shop/goods-returning/ and purchase a stronger magnet. These 30 days are just for testing the goods, after which the seller can refuse the return.

12 other products in the same category: